The Lowrance LCX-112C is a combined chartplotter and fishfinder that uses three proprietary connectors: a 10-pin PWR/DATA connector supporting NMEA 2000 and RS-232 communications, a 5-pin NMEA 2000 network connector, and a 7-pin sonar transducer connector. This page covers the pinouts specific to the LCX-112C; only the pins listed in each table are documented.
PWR/DATA
Lowrance 10 pin PWR/DATA connector at the device.
| Pin | Description |
|---|---|
| 1 | NMEA 2000 +12 VDC |
| 2 | N/C |
| 3 | NMEA 2000 Shield |
| 4 | COM 2 NMEA OUT |
| 5 | RS-232 Data Shield |
| 6 | COM 1 NMEA OUT |
| 7 | 12 VDC Main Power |
| 8 | Ground (main 12VDC) |
| 9 | NMEA 2000 Ground |
| 10 | COM 1 NMEA IN |
GPS
Lowrance 5 pin network connector at the device.
| Pin | Description |
|---|---|
| 1 | NMEA 2000 GND |
| 2 | NMEA 2000 PWR |
| 3 | NMEA 2000 comm |
| 4 | Drain/GND |
| 5 | NMEA 2000 comm |
SONAR TRANSDUCER (50/200kHz)
(except GlobalMap Series)
Lowrance 7 pin transducer connector at the device.
| Pin | Description |
|---|---|
| 1 | XDCR+ |
| 2 | Speed Data |
| 3 | Power (temp & speed) |
| 4 | Temp Data |
| 5 | XDCR- |
| 6 | Ground (XDCR) |
| 7 | Ground (temp & speed) |
Notes
Pin numbers refer to the connector on the device; pins marked N/C are not connected.