Kodak Easyshare camera dock

Pinout of the proprietary 22-pin Kodak EasyShare camera dock connector used on CX/DX-series cameras for data transfer, charging, and A/V output via the EasyShare dock.

The Kodak EasyShare Camera Dock uses a proprietary 22-pin connector located at the base of compatible CX- and DX-series cameras (circa 2003–2005). The dock carries data, charging current, and A/V signals through a single interface: it aligns with the camera via a locator pin and hole system, and connects to a host computer through a standard USB Type-B (‘square’) receptacle on the dock’s rear panel. USB communication follows the USB 2.0 full-speed specification using the PIMA 15740 (Picture Transfer Protocol) for image transfer. Kodak never published a formal pin-level specification for the camera-side dock connector.

UNKNOWN connector at the bottom of camera (22 pin) Bottom of camera

Kodak Easyshare camera dock connector diagram

PinNameDirectionDescription
1
2
3
4
5
6
7
8
9
10
11GNDground
12GNDground
13GNDground
14
15
16
17Audio OUTAudio output
18
19
20Video OUTS-Video output
21+2.4V
22+2.4V

Notes

  • Probably another pin set to low or high is necessary for video_out_pin activation.
  • The dock’s computer-side connector is a standard USB Type-B receptacle; a round 7 V DC jack on the dock rear panel provides power.
  • The camera must not be seated in the dock when making the initial USB and power connections.
  • The dock connector mates with the camera base via a locator pin and hole alignment system; no force fitting is possible in the wrong orientation.

Signals

  • GND — common ground reference; pins 11, 12, and 13 are all ground.
  • Audio OUT — analogue audio output routed through the dock to the connected television or audio device (pin 17).
  • Video OUT — composite video output (NTSC or PAL, user-selectable in the camera’s Setup menu) routed through the dock (pin 20); the cell label “S-Video output” reflects the original page entry — the signal is composite video.
  • +2.4V — function not publicly documented; pins 21 and 22 carry this voltage level.
  • Pins 1–10, 14–16, 18, and 19 — function unknown.

References

Category:Digital Camera Connectors