This page documents the connectors used by third-party data, charging, and synchronisation cables for the Nokia 9110, 9110i, 9210, and 9210i Communicator handsets. The pin layout is specific to this model family. Only the pins relevant to the cable interface are listed.
| Pin | Signal |
|---|---|
| 1 | Gnd |
| 2 | Charger Input |
| 3 | Charger Output |
| 4 | FBus Tx |
| 5 | FBus Rx |
| 6 | DTR |
| 7 | Gnd |
| 8 | SGnd |
| 9 | XEar |
| 10 | XMic |
| 11 | MBus |
System Connector Nokia 9110
| Pin | Signal |
|---|---|
| 1 | Gnd |
| 2 | DCE_DTR - PDA CPU data set ready |
| 3 | DCE_RX - PDA CPU Transmit data |
| 4 | DCE_TX - PDA CPU Receive data |
Notes
Pin numbers refer to the connector on the handset; pins not listed are unused by the cable.
References
- Nokia 9110/9110i Communicator Service Manual (RAE-2) — System Connector (X170) — Nokia Corporation.