This page documents the 10-pin connector used by a third-party data/flash cable for the Benq handsets listed above. The pin layout is specific to this model family, and only the pins utilised by the cable are listed below.
10 pin Benq cell phone special connector at the mobile phone ( keypad up)
| Pin | Signal | Description |
|---|---|---|
| 1 | GND | |
| 5 | Rx | |
| 6 | Tx |
Notes
Pin numbers refer to the connector on the handset with the keypad facing up; pins not listed are unused by the cable.
References
- BenQ CL71 — FCC ID JVPCL71, Schematics exhibit (system I/O connector) — U.S. Federal Communications Commission filing.