Apple iPod jack

It appears that you are using AdBlocking software. The cost of running this website is covered by advertisements. If you like it please feel free to a small amount of money to secure the future of this website.

2nd generation iPod

2nd generation iPod jack connector - 6 pin 4 pole 1/8 inch plug + 2 rings 2nd generation iPod jack connector - 6 pin 4 pole 18 inch plug + 2 rings iPod (at cable side)

Pin Signal Color
1 Audio left black
2 Audio right white
3 Audio ground (GND) red
4 Serial RxD green
5 +3.3V Power to Remote blue
6 Digital ground (GND) yellow

3rd generation iPod

3rd generation iPod jack connector - 8 pin 4 pole plug + 4 pin 3rd generation iPod jack connector - 8 pin 4 pole plug + 4 pin (at cable side)

Pin Signal Color
1 Audio left black
2 Audio right white
3 Audio ground (GND) red
4 Sleeve - Video Out on iPod Photo and 5th generation iPod
5 Serial RxD green
6 Serial TxD
7 Digital ground (GND) yellow
8 +3.3V Power to Remote blue

Notes

  • Serial signals are not directly compatible with RS232 levels, you have to use a RS232-TTL converter such as the MAX3232E chip.
  • On the 3rd generation iPod the remote control data is sent via a serial Apple Accessory Protocol.

References

Category:Portable Device Connectors

 

© 1998-2017 – Nicola Asuni - Tecnick.com - All rights reserved.
about - disclaimer - privacy