Casio Cassiopeia E-125, BE-300, EG-800, EM500 cradle

It appears that you are using AdBlocking software. The cost of running this website is covered by advertisements. If you like it please feel free to a small amount of money to secure the future of this website.

PDA connectors and cables Cassiopeia cradle connector

UNKNOWN connector at the device (display up, power is on the left side, headphone is on the right side)

Pin Name Description
1 ADPIN (?) Diode Cathode, from USB+5V
2 XSEL0 unconnected ?
3 GND
4 SEL0 connect to GND
5 SEL1 connect to GND
6 SEL2 connect to R-divider: 10k to GND, 4.7k to USB+5V
7 MPX0 unconnected ?
8 MPX1 unconnected ?
9 CTS UART TTL level CTS
10 DCD UART TTL level DCD (connect to 14, 15)
11 RX UART TTL level RX - receive data
12 TX UART TTL level TX - transmit data
13 RTS UART TTL level RTS
14 DTR UART TTL level DTR (connect to 10, 15)
15 DSR UART TTL level DSR (connect to 10, 14)
16 MPX9 unconnected ?
17 +DATA USB data Positive
18 -DATA USB data Negative
19 V3 Power +3.3V from Cassiopeia
20 ADGND USB GND

Notes

References

Category:PDA Connectors

 

© 1998-2017 – Nicola Asuni - Tecnick.com - All rights reserved.
about - disclaimer - privacy