Nokia 6610 Color LCD

It appears that you are using AdBlocking software. The cost of running this website is covered by advertisements. If you like it please feel free to a small amount of money to secure the future of this website.

connector or cable wiring scheme Pinouts for the 10 Pin connector on both the types of LCD’s (green PCB and brown PCB)

Pin Name Description
1 VDD 3.3 V LCD Power
2 Reset ?
3 SDATA Serial Data (Synchronous data - can use SPI port on Microchip PIC MCU’s)
4 SCLK Serial Clock
5 CS Chip Select
6 VLCD 3.3V LCD Power
7 NC Not connected
8 GND LCD Power
9 LED- (0V) Backlight LED Cathode
10 LED+ (6V) Backlight LED Anode

Notes

  • The connector on the LCD Module used in Nokia 6610 phones. Also applicable to Chinese LCD remakes sold as replacement parts.
  • This 10 pin connector is used on both types of Color LCDs - the green PCB and brown PCB.

References

Category:Cellular Phones Connectors

 

© 1998-2017 – Nicola Asuni - Tecnick.com - All rights reserved.
about - disclaimer - privacy