APC Smart UPS

It appears that you are using AdBlocking software. The cost of running this website is covered by advertisements. If you like it please feel free to a small amount of money to secure the future of this website.

connector or cable wiring APC Part # 940-0024C (black cable). Should work with APC PowerChute Plus, PowerChute V/S, PowerChute Pro software

9 pin D-SUB male connector layout 9 pin D-SUB male connector to the UPS

9 pin D-SUB female connector diagram 9 pin D-SUB female connector to the PC

| UPS Signal Name | DB-9 Male (UPS end) | DB-9 Female (PC end) | PC Signal Name | |—————|———–|————-|———————-| | TX / AC Fail | 2 | 2 | Rx, Received Data | | RX / Shutdown | 1 | 3 | Tx, Transmitted Data | | Common | 9 | 5 | GND |

Notes

  • At the PC end: pins 1,4 (DCD, DTR) shorted; pins 7,8 (RTS, CTS) shorted.

References

Category:Miscellaneous Cables

 

© 1998-2016 – Nicola Asuni - Tecnick.com - All rights reserved.
about - disclaimer - privacy